Видео

Hello, Thanks for your question. The adjustment software PACTware and the VEGA DTMs (Device Type Manager) allow standardised adjustment of all VEGA sensors and devices. The full version DTM collection is free for everyone: www.vega.com/en/products/product-catalog/signal-conditioning/software/dtm-collection-and-pactware

Hello, Thanks for your question. This information can be found in the manual of the sensor and you can of course also contact us directly. Please find your local representative here: www.vega.com/en/company/vega-worldwide

Hello, Thanks for your question. If you have a VEGAPULS 31 the manual is helpful www.vega.com/en/products/product-catalog/level/radar/vegapuls-31. You can also contact us directly and find your local representative here: www.vega.com/en/company/vega-worldwide

Hello, Thanks for your comment - do you have a specific question?

Hello, thanks for your comment. In principle, it makes sense to align in the “stationary zone” in order to achieve the highest possible accuracy. But then it may not be possible to measure up to the silo discharge. That's why aligning it with the center of the container is the better solution in many cases.

Thanks for your question. If the filling level changes, also due to temperature changes, VEGA sensors notice this. However, we do not measure the temperature in the medium. More information can be found here: www.vega.com/en/industries/energy/coal-power-plant/fuel-oil-storage-tanks

Hello, please have a look at our drinking water solutions which you can find here: www.vega.com/es-es/sectores/agua-y-aguas-residuales/suministro-de-agua-potable

Thanks for your question. Please reach out to our technical support colleagues: www.vega.com/en/service-and-training/technical-support

Yes, the measurement can be affected by things which are in the detection area. For more information regarding your application please contact your local subsidiary: www.vega.com/en/company/vega-worldwide

Hello, Thanks for your question. There can be different reasons for jumps to a higher level, for examples false signals from filling stream, build up or similar things. To determine where exactly the jumps are coming from the echo curve and the installation has to be checked. For further help please contact your local subsidiary: www.vega.com/en/company/vega-worldwide

Hello, Thanks for your question. Would you please contact our Technical Support - they will be able to help: www.vega.com/en/service-and-training/technical-support

Have you experienced problems? You can reach out to our technical support at any time: www.vega.com/en/service-and-training/technical-support

Hallo und danke für deine Frage. Der Nullpunkt lässt sich nur bei kleineren Kratzern noch nachstellen und der Fehler verhält sich in der Regel nicht mehr linear. Und die Annahme ist richtig: bei starken Beschädigungen kann Öl austreten, weshalb spätestens dann keine Messung mehr möglich ist.

Hello, Thanks for your question - please find an application example for diesel level measurement on our website: www.vega.com/fr-fr/industries/industrie-cimentiere/reservoir-de-gazole and don't hesitate to contact us in case you need more information: www.vega.com/fr-fr/societe/vega-partout-dans-le-monde

@@VEGA_Level_Pressure thanks a lot.

Thank you for your question. If you mean the "VEGAFLEX 81", you need a PLICSCOM with Bluetooth to use the function. www.vega.com/en/products/product-catalog/accessory-and-spare-parts/accessory/plicscom If you have a PLICSCOM already, the switch at the back must be activated and a pin other than 0000 must be assigned to the device.

Hello, thanks for your question. We recommend contacting our VEGA representative on site directly to find the best solution: www.vega.com/en/company/vega-worldwide

Hello, Thanks for your question. There is no general answer to this question. Depending on the vessel geometry, a VEGAPULS free-radiating radar can work here. In very cramped conditions, a guided microwave (VEGAFLEX with coax) is the right measuring instrument. If you require application-specific advice, please contact one of our subsidiaries in your area. (www.vega.com/en-de/company/vega-worldwide)

@@VEGA_Level_Pressure Thanks, won't the measuremnets be affected by the EM fields from the windings

@@EssayWriting-du3pw To be able to find the best solution for your application, we need some more information. Please contact one of our subsidiaries in your area, which you can find here: www.vega.com/en-de/company/vega-worldwide

Hello, Thanks for your question. In order to be able to provide you with the best possible help with your application, please contact the responsible VEGA agency: www.vega.com/en/company/vega-worldwide

Hello, thanks for your question. Please have a look at our solutions for LPG tanks: www.vega.com/en/industries/refining-petrochemical/lpg-spherical-tank

Hello, thanks for your question. Choosing the right sensor depends on the type of wave and the speed. For measuring ranges up to approx. 10 m, a VEGAPULS 42 would be a good solution, as the sensor has a very high update rate. But since this is a very special application, we recommend contacting our VEGA representative on site directly to find the best solution: www.vega.com/en/company/vega-worldwide

Equipos de todo tipo... En este caso sensores industriales, pero si... también es para celulares... polvo y salpicaduras o inmerción hasta 1m x 30min es la ip67.

Hello, Thanks for your question. Please have a look at our solutions for Coal power plants, you can find a detailed description of each application here: www.vega.com/en-de/industries/energy/coal-power-plant

Thanks for your question. We recommend a glass thickness of no more than 30-40 mm.

​@@VEGA_Level_Pressure Thank you for your response, Please will the VEGAPULS 31, work perfectly if the pressure in the tank is 10bar, since the instrument is sensing through glass.

Helllo, thanks for your question. Could you specify automotive applications a bit more in detail?

Hello, thanks for your question. You can use our device search on the website to find out if it really is a VEGA sensor. Please enter the serial number here: www.vega.com/en/products/serialnumber-search

@@VEGA_Level_Pressure buenas noches:

EL CODIGO DEL PRODUCTO SEGUN LA PLACA ES: 202212RLM005. ESPERO SU PRONTA RESPUESTA Y AYUDA, POR FAVOR

@@rafaelignaciocardenasrios3730 Thank you for checking. According to the serial number we are not sure if this is a VEGA sensor. But if yes, please reach out to our technical service colleagues: www.vega.com/en/service-and-training/technical-support or your local VEGA representative: www.vega.com/en/company/vega-worldwide

Thanks for your question. There are no separate settings necessary, but these may need to be optimized. Please contact our technical service: www.vega.com/en/service-and-training/technical-support

@@VEGA_Level_Pressure ثيضؤييؤب ثبث

​ ❤❤😅

​@@VEGA_Level_Pressurep Tvf .hbvc

😂p0 1😅

Thanks for your question, please have a look at our radar sensor VEGAPULS 6X: www.vega.com/radar